- The price indicates an expected repair cost. We can give you a detailed and accurate quote for the total cost of the repair after an inspection.
- We can only undertake the indicated repair time if an appointment is booked. In other cases, the repair time depends on the capacity of the service and we can only undertake the repair on a first-come, first-served basis.
- In case of a complex problem (in case of failure of several parts), we recommend filling out our quote request form, where we can provide a unique quote different from the list prices.
Dear Customers! Our service center will be closed between 2024.12.20. and 2025.01.02.! Opening: 2025.01.03. (X)
MacBook Pro 13 (2018) Touchbar display
The broken display is ugly and frustrating. In addition, it can lead to further malfunctions, such as soaking in the bathroom. The sooner we fix it, the more time, money and annoyance we save you.
Show details »MacBook Pro 13 (2018) Touchbar display malfunctions
if you experience any of these, contact us- If only the glass is damaged, but the display shows an image below it, it is still strongly recommended to replace the entire MacBook Pro 13 (2018) Touchbar display. In case of glass replacement, there is a high chance that your touch will be destroyed after 1-2 months. For this reason, we only replace complete displays (touch glass + LCD) with a warranty.
- Even if a dark black spot appears on the screen, you will probably need to replace your MacBook Pro 13 (2018) Touchbar display. This is most often the result of the LCD or AMOLED being hit during the display from which it flows.
- If the touch stutters, does not follow our movements directly, you can still suspect a display malfunction. If you also produce this error with a new MacBook Pro 13 (2018) Touchbar display, you may face a Touch IC problem, which will be a more complicated repair process.
- If the display goes completely dark, but the device rings, for example, it is likely that the MacBook Pro 13 (2018) Touchbar display is broken. You may want to perform a hard reset before.
- The MacBook Pro 13 (2018) Touchbar display is covered with a layer of glass, the most common failure of which is that it can easily crack or even break into a web.
- If streaks appear on the screen of the unit, a small percentage may be that only the ribbon cable has moved out of place due to a major impact. If reconnecting it does not resolve the issue, all you have to do is replace the MacBook Pro 13 (2018) Touchbar display.
Why Smart Clinic?
- In our service points, we are waiting for our customers in a number proportional to the current turnover so, thus ensuring record speed in repairs.
- Our work is characterized by unconditional precision. Our colleagues are committed to their profession, which is why they put all their knowledge into repairs.
- Based on customer feedback, 96.1% of our customers would recommend our service to a friend.
- We are the only lifetime warranty on our repairs in Hungary. (Except for battery replacement and logic board repairs.)
- We have been for our customers for more than 8 years, they can count on us in the long run.
Who we've already helped
TestimonialsFAQ
You can find our answers to the most frequently asked questions here.We work with several types of parts. It is also possible to repair with factory and aftermarket parts. For each repair, we make an individual recommendation as to which is the better choice in terms of price/value ratio. The quality of the parts is also indicated in the price lists. And by clicking on it, we describe in detail what it means.
The quality of the parts has been collected for you on the page below.
80-90% of repairs can usually be done within 1 hour, which means that you can wait on site and don\'t have to spend days on your device. The service time depends on the nature of the fault, the service load and the stock. Replacing a simpler peripheral (display, battery, speakers, cameras, charger plugs, etc.) takes about 0.5-1 hours. If the appliance is not screwed, but is glued, then the drying time of the glue has to be added, which is 2-3 hours plus. It takes at least 1 day to repair the soaked devices, but rather 2-3 days before we can test all the features on it. The exact repair time in our service centers can be precisely determined by our colleagues.
We recommend that you consider the possibility of making an appointment. If you arrive on a confirmed date, we can undertake the repair times found on our website.
We have a lot of customers in the countryside who find our courier service a convenient solution. You can get your device repaired in as little as 3 days, but in most cases within 5-6 days. All you have to do is fill out the form here and we will send you our courier already. You can find a detailed description of this convenience service here.
Testing your device is basically free if you request a repair at the suggested price. Inspection is chargeable if it is not requested for repair or is not performed by us. During the test, our service technicians perform the same service, using test parts to determine which peripherals need replacement. From simple to more complex examinations, it can take at least 0.5 to 3 hours for the source of the error to be identified. We'll charge a fraction of this fee for testing if you don't request a repair.
We also charge a test fee in cases where the device is found to be unserviceable or not economically viable. This is because by the time we dare to report this from a device, our colleagues often work on it for days, examining every opportunity. After all, our main goal is to find a solution, but unfortunately, this is not always the case for us.
Simple repairs include replacing peripherals such as display, battery, cameras, ribbon cables ... etc. These peripherals can be replaced in 0.5 to 1 hour, relatively easily. The worse and more complicated case is if replacing the peripheral does not solve the problem. In this case, the motherboard should continue to search for the cause of the error. A motherboard is much more complex, much more complex than the device itself. Alternatively, parts mounted on the system board may only be moved under a microscope. A motherboard failure can be very complex, as each component is almost related to each one, so there are many variations that can be ruined. Mapping these error opportunities requires several hours and much more expertise. Faults on board components such as ICs, resistors, capacitors are not always obvious, which is not a matter of minutes. Tests after system board repairs (such as diving, charging) are also time consuming, and we dare to say that the device is okay. All in all, a careful motherboard repair can take several days.
Water damaged device means any appliance that has been exposed to moisture, whether it is a drop of water, rain, diving into a pool, spilling coffee, falling into the toilet, condensation in the bathroom, etc. All of these cases result in corrosion processes inside the unit. Liquids have conductive properties. Electricity always travels to the smallest resistance. Thus, when the device is exposed to moisture, the electrical current creates a connection between components that are not a design event. Doing so will cause the components to malfunction and damage the device. Manufacturers and mobile operators are letting go of the hands of liquid-damaging devices. The product warranty does not cover such failures unless it has previously been covered by such insurance. What we can do is try to slow down this oxidation process. Liquid-damaging components will be cleaned or replaced as appropriate. The motherboard is also cleaned with an ultrasonic washer to remove most of the oxide layers. The effectiveness of the repair depends on the degree of soaking and the time since soaking. For this reason, there is no pre-calculated price, because every situation is different, many factors unfortunately. There is no assurance that further malfunctions will not occur. The reason for this is that we can only slow down the once-started oxidation processes, not stop them. However, more than 60% of repairs are successful, in other cases, later failures may occur. We usually suggest that if you ever succeed in resurrecting the device, they are best served if it is sold while it is in operation.
Some manufacturers (such as Samsung, Sony, Huawei) are launching glued-on handsets. It is worth noting that both the display and the back cover are attached with a thin layer of adhesive (2-3 mm) to the body of the device. Any repair starts with the removal of the display or back cover. In this case, the adhesive is thawed on a heating pad so that you can use gentle means to remove the display (or back cover) to access the part you are replacing. This operation requires a high degree of precision and a lot of practice from a service technician. After replacing a defective part, the display or back cover must be glued back to the unit. Usually we use a special surface treatment, factory glue strips and press. The glue has a drying time of 2-3 hours during the press, when we can dispense the machine without any problems. If we do not wait for this time, the adhesive will most likely be released, which could cause further damage. This is not worth saving.
Currently we are available in Budapest, which you can click here. If you live far away from us, no problem, feel free to use our service courier by clicking here.
You can see the opening hours of our services here. You can come to us at any time during this period, you will be sure to wait within a few minutes, and you will not have to wait long for service. It would be best to book an appointment, because then our colleagues are guaranteed to take care of you. In any case, try to schedule it so that it does not arrive 10 minutes before closing, as we will probably only be able to start repairing the unit the next day. If you arrive no later than 1 hour before closing, there is a good chance that you will be able to take the device even before closing so that you can take it even after that. Of course, the repair time can always be accurately determined on site. In all cases, the repair time will depend on the nature of the malfunction and the amount of work involved.
Whenever you make an appointment, we check the current stock to ensure that there is no need for the customer to come to our service unnecessarily. We work with multiple service centers and bring parts between service centers on a daily basis. We will only confirm your reservation if you can guarantee 100% of the parts required for repair at the time and place of booking. This usually requires 1 business day. This is the reason why we do not accept bookings within 24 hours. Regardless, if you would like to come early, give us a call (+36 30 630 22 77) or write to us, as it is possible that we will arrive sooner.
Obviously, we can only guarantee the part we replace. For example, if we replace a battery at the customer's request, and the speaker, for example, becomes damaged in a few months, we can replace it for an additional fee because we can only guarantee the battery. The two components have nothing to do with each other. In situations where, for example, we replace the battery (say HUF 10,000) because it runs out of power quickly and it turns out that the problem still persists, we test the device and then find that Charge Controller IC error (Assuming a HUF 25,000 charge), the device will be charged a replacement battery charge from the Charge Controller IC replacement price. So 25,000-10,000 = HUF 15,000 to pay. In this case, the battery replacement was free for you.
No. Smart Clinic is independent of all providers and manufacturers. We do not have a contractual relationship with anyone, we only make repairs beyond our warranty. Therefore, it is in our best interest to perform repairs to the best of our ability and not to work out the warranty terms. However, we recommend that if your machine is still under warranty (and it is not wet or crushed as these will be disqualifying reasons), you may want to contact a warranty service with your problem. If you cannot find a solution there, please feel free to contact us and we will try to help.
The overwhelming majority of you will find on our website the appliances for which we have spare parts at our disposal. However, if you can't find it, that doesn't mean we can't fix it. We work with large foreign suppliers, and we can procure many parts so that you can have the right one for your device. Contact us, write us a message by clicking here, and our colleagues will respond to you.
You're not welcome. We have a large stock and tested parts. The prices in our price list are mostly made up of salary. We are sure that we have a much higher quality component and that it is much cheaper than what you order from eBay. If you insist on it, we will undertake to install the part you bring, but we can do so only by subtracting the price of the part we buy and invoicing it. This will make you financially worse off. Quite often, the supplied part does not work properly, in which case we replace it with our own. However, if it works, we cannot guarantee any part that you bring. We recommend that you do not order parts of a lower quality than the one we have in stock. It will not be cheaper either, and if there is a problem, there is no one to turn to for warranty.
No. In addition, we cannot guarantee that a device that we have repaired will not be repaired or replaced at a later date. We've repaired a lot of warranty phones that no one notices we've reached out to. That's why we don't want to take responsibility for it. We know the attitude of after-sales service providers, and for that reason we do not want to put a dent in our neck. Of course, if a dear customer asks for help, we will, but we cannot guarantee why a warranty service will refuse a device.
Because there are some types of malfunctions where troubleshooting and repairing it is a much more complex process than replacing a battery. For example, repairing glued appliances, where only disassembly, then gluing and drying only takes 2-3 hours extra. But this can be a software failure, for example, where you need to save up to GB of data for hours and then restore everything after repair. The repair time of a soaked appliance, before we exclude any faults, can take up to a week in the worst case. Or a device that doesn't charge, for example. In this case, we replace the battery or a charging connector and then perform dive and charge tests directly. Only these tests take 1-2 days. If it still doesn't charge or dives fast, let's look at the motherboard level. Charge controller IC, PM IC possibly. Replacing these alone can take 2-3 hours under the microscope. Then the dive and charge test again. Another 1-2 days. For many devices, we need to start by restoring the software to the factory, which requires a backup and then restoring it at the end of the repair. Nowadays, one can be up to 50-60 GB or more, which can also be measured in hours. But it may also be that the part you are waiting for is out of stock. For individual purchases, this can take up to 1 month, but usually takes 1-2 weeks to resolve. If these cases add up, it can really delay the repair. To sum it all up, we will do our best to keep the time as short as possible, because then we are in the best interest of ours. Needless to say, we don't sit on appliances, because it won't heal itself.
No. In any case, it is worth looking at what standard the waterproofing manufacturer declares. Mostly IP67 rated devices, with the first number, 6 being "Fully protected against dust", the second number being 7, "Protected against submersion in water for a limited time (0.15- 1 m for 30 minutes) ". It is worth adding that these findings are valid under laboratory conditions. In real life, however, an IP67-compliant device can do just that. In this case, the liquid indicator lights will be discolored, liquid will be spilled, and the warranty will be void. For IP68, the number 8 means "Continuous use under water (1 to 3 meters as specified by the manufacturer)". In fact, this IP68 represents the total water resistance that the average user thinks. However, this standard cannot be used because, for example, how would a speech speaker sound? Not at all. It could be used just like underwater telephony. These standards are measured under laboratory conditions, so this IP certification should no longer be available after servicing. Of course, let's have a non-IP67 good phone rather than a bad IP67.
Yes. We provide 1 month warranty for such repairs. This is because this is an amount of interference with the device that may cause further problems in the future. For example, basically a motherboard repair service is not (or cannot) be undertaken by a warranty service provider. However, in many cases, these problems can be corrected, but as time goes on, the older a device is, and the more it is repaired, the more likely it is to break down again. Like just an old car.
The problem is we can say with 90% certainty that the bonding will come off. And have to come back to re-glue again. Not that you will not be able to save time, but you will have to pay a fee again, because in this case we can not guarantee it. Not to mention that the gap between the split screen or the back cover may get dirty, causing a short circuit, or blurring the display backlight, which can only be remedied by replacing the display. These are all additional costs and time spent in service. That is why we do not recommend that you take the device away prematurely. But of course, at our own risk.