|OEM||39.990,- Ft||Készlet info|
Scratches and dents may appear on the Galaxy S7 housing due to use, these are mostly aesthetic problems, it is not necessary to replace the part. However, if you are demanding of your device and are disturbed by these injuries, contact us with confidence. We offer a solution to your problem. There is no need to hide these injuries with an ugly case.
We work with several types of parts. You will find these in the price lists right at the beginning of the page. Parts marked with the abbreviation ORG are branded parts that are directly marketed by the manufacturer of the device. In the vast majority of cases, the price of ORG parts may be higher than the used market price of the device, and such repairs may not be economical. OEM parts represent factory-quality parts, the same quality as ORG parts, sometimes of a slightly lower quality, in exchange for cheaper and no noticeable quality difference. The third quality you will find in our service is AAA. These are high quality but aftermarket parts, but we dare to recommend them to those who want to get away with service more economically.
80-90% of repairs can usually be done within 1 hour, which means that you can wait on site and don\'t have to spend days on your device. The service time depends on the nature of the fault, the service load and the stock. Replacing a simpler peripheral (display, battery, speakers, cameras, charger plugs, etc.) takes about 0.5-1 hours. If the appliance is not screwed, but is glued, then the drying time of the glue has to be added, which is 2-3 hours plus. It takes at least 1 day to repair the soaked devices, but rather 2-3 days before we can test all the features on it. The exact repair time in our service centers can be precisely determined by our colleagues.
We have a lot of customers in the countryside who find our courier service a convenient solution. You can get your device repaired in as little as 3 days, but in most cases within 5-6 days. All you have to do is fill out the form here and we will send you our courier already. You can find a detailed description of this convenience service here.
Testing your device is basically free if you request a repair at the suggested price. Inspection is chargeable if it is not requested for repair or is not performed by us. During the test, our service technicians perform the same service, using test parts to determine which peripherals need replacement. From simple to more complex examinations, it can take at least 0.5 to 3 hours for the source of the error to be identified. We'll charge a fraction of this fee for testing if you don't request a repair. We also charge a test fee in cases where the device is found to be unserviceable or not economically viable. This is because by the time we dare to report this from a device, our colleagues often work on it for days, examining every opportunity. After all, our main goal is to find a solution, but unfortunately, this is not always the case for us.
Simple repairs include replacing peripherals such as display, battery, cameras, ribbon cables ... etc. These peripherals can be replaced in 0.5 to 1 hour, relatively easily. The worse and more complicated case is if replacing the peripheral does not solve the problem. In this case, the motherboard should continue to search for the cause of the error. A motherboard is much more complex, much more complex than the device itself. Alternatively, parts mounted on the system board may only be moved under a microscope. A motherboard failure can be very complex, as each component is almost related to each one, so there are many variations that can be ruined. Mapping these error opportunities requires several hours and much more expertise. Faults on board components such as ICs, resistors, capacitors are not always obvious, which is not a matter of minutes. Tests after system board repairs (such as diving, charging) are also time consuming, and we dare to say that the device is okay. All in all, a careful motherboard repair can take several days.
Water damaged device means any appliance that has been exposed to moisture, whether it is a drop of water, rain, diving into a pool, spilling coffee, falling into the toilet, condensation in the bathroom, etc. All of these cases result in corrosion processes inside the unit. Liquids have conductive properties. Electricity always travels to the smallest resistance. Thus, when the device is exposed to moisture, the electrical current creates a connection between components that are not a design event. Doing so will cause the components to malfunction and damage the device. Manufacturers and mobile operators are letting go of the hands of liquid-damaging devices. The product warranty does not cover such failures unless it has previously been covered by such insurance. What we can do is try to slow down this oxidation process. Liquid-damaging components will be cleaned or replaced as appropriate. The motherboard is also cleaned with an ultrasonic washer to remove most of the oxide layers. The effectiveness of the repair depends on the degree of soaking and the time since soaking. For this reason, there is no pre-calculated price, because every situation is different, many factors unfortunately. There is no assurance that further malfunctions will not occur. The reason for this is that we can only slow down the once-started oxidation processes, not stop them. However, more than 60% of repairs are successful, in other cases, later failures may occur. We usually suggest that if you ever succeed in resurrecting the device, they are best served if it is sold while it is in operation.
Some manufacturers (such as Samsung, Sony, Huawei) are launching glued-on handsets. It is worth noting that both the display and the back cover are attached with a thin layer of adhesive (2-3 mm) to the body of the device. Any repair starts with the removal of the display or back cover. In this case, the adhesive is thawed on a heating pad so that you can use gentle means to remove the display (or back cover) to access the part you are replacing. This operation requires a high degree of precision and a lot of practice from a service technician. After replacing a defective part, the display or back cover must be glued back to the unit. Usually we use a special surface treatment, factory glue strips and press. The glue has a drying time of 2-3 hours during the press, when we can dispense the machine without any problems. If we do not wait for this time, the adhesive will most likely be released, which could cause further damage. This is not worth saving.
You can see the opening hours of our services here. You can come to us at any time during this period, you will be sure to wait within a few minutes, and you will not have to wait long for service. It would be best to book an appointment, because then our colleagues are guaranteed to take care of you. In any case, try to schedule it so that it does not arrive 10 minutes before closing, as we will probably only be able to start repairing the unit the next day. If you arrive no later than 1 hour before closing, there is a good chance that you will be able to take the device even before closing so that you can take it even after that. Of course, the repair time can always be accurately determined on site. In all cases, the repair time will depend on the nature of the malfunction and the amount of work involved.
Whenever you make an appointment, we check the current stock to ensure that there is no need for the customer to come to our service unnecessarily. We work with multiple service centers and bring parts between service centers on a daily basis. We will only confirm your reservation if you can guarantee 100% of the parts required for repair at the time and place of booking. This usually requires 1 business day. This is the reason why we do not accept bookings within 24 hours. Regardless, if you would like to come early, give us a call (+36 30 630 22 77) or write to us, as it is possible that we will arrive sooner.
Obviously, we can only guarantee the part we replace. For example, if we replace a battery at the customer's request, and the speaker, for example, becomes damaged in a few months, we can replace it for an additional fee because we can only guarantee the battery. The two components have nothing to do with each other. In situations where, for example, we replace the battery (say HUF 10,000) because it runs out of power quickly and it turns out that the problem still persists, we test the device and then find that Charge Controller IC error (Assuming a HUF 25,000 charge), the device will be charged a replacement battery charge from the Charge Controller IC replacement price. So 25,000-10,000 = HUF 15,000 to pay. In this case, the battery replacement was free for you.
No. Smart Clinic is independent of all providers and manufacturers. We do not have a contractual relationship with anyone, we only make repairs beyond our warranty. Therefore, it is in our best interest to perform repairs to the best of our ability and not to work out the warranty terms. However, we recommend that if your machine is still under warranty (and it is not wet or crushed as these will be disqualifying reasons), you may want to contact a warranty service with your problem. If you cannot find a solution there, please feel free to contact us and we will try to help.
You can see our current opening hours here.
The overwhelming majority of you will find on our website the appliances for which we have spare parts at our disposal. However, if you can't find it, that doesn't mean we can't fix it. We work with large foreign suppliers, and we can procure many parts so that you can have the right one for your device. Contact us, write us a message by clicking here, and our colleagues will respond to you.
You're not welcome. We have a large stock and tested parts. The prices in our price list are mostly made up of salary. We are sure that we have a much higher quality component and that it is much cheaper than what you order from eBay. If you insist on it, we will undertake to install the part you bring, but we can do so only by subtracting the price of the part we buy and invoicing it. This will make you financially worse off. Quite often, the supplied part does not work properly, in which case we replace it with our own. However, if it works, we cannot guarantee any part that you bring. We recommend that you do not order parts of a lower quality than the one we have in stock. It will not be cheaper either, and if there is a problem, there is no one to turn to for warranty.
No. In addition, we cannot guarantee that a device that we have repaired will not be repaired or replaced at a later date. We've repaired a lot of warranty phones that no one notices we've reached out to. That's why we don't want to take responsibility for it. We know the attitude of after-sales service providers, and for that reason we do not want to put a dent in our neck. Of course, if a dear customer asks for help, we will, but we cannot guarantee why a warranty service will refuse a device.
Because there are some types of malfunctions where troubleshooting and repairing it is a much more complex process than replacing a battery. For example, repairing glued appliances, where only disassembly, then gluing and drying only takes 2-3 hours extra. But this can be a software failure, for example, where you need to save up to GB of data for hours and then restore everything after repair. The repair time of a soaked appliance, before we exclude any faults, can take up to a week in the worst case. Or a device that doesn't charge, for example. In this case, we replace the battery or a charging connector and then perform dive and charge tests directly. Only these tests take 1-2 days. If it still doesn't charge or dives fast, let's look at the motherboard level. Charge controller IC, PM IC possibly. Replacing these alone can take 2-3 hours under the microscope. Then the dive and charge test again. Another 1-2 days. For many devices, we need to start by restoring the software to the factory, which requires a backup and then restoring it at the end of the repair. Nowadays, one can be up to 50-60 GB or more, which can also be measured in hours. But it may also be that the part you are waiting for is out of stock. For individual purchases, this can take up to 1 month, but usually takes 1-2 weeks to resolve. If these cases add up, it can really delay the repair. To sum it all up, we will do our best to keep the time as short as possible, because then we are in the best interest of ours. Needless to say, we don't sit on appliances, because it won't heal itself.
No. In any case, it is worth looking at what standard the waterproofing manufacturer declares. Mostly IP67 rated devices, with the first number, 6 being "Fully protected against dust", the second number being 7, "Protected against submersion in water for a limited time (0.15- 1 m for 30 minutes) ". It is worth adding that these findings are valid under laboratory conditions. In real life, however, an IP67-compliant device can do just that. In this case, the liquid indicator lights will be discolored, liquid will be spilled, and the warranty will be void. For IP68, the number 8 means "Continuous use under water (1 to 3 meters as specified by the manufacturer)". In fact, this IP68 represents the total water resistance that the average user thinks. However, this standard cannot be used because, for example, how would a speech speaker sound? Not at all. It could be used just like underwater telephony. These standards are measured under laboratory conditions, so this IP certification should no longer be available after servicing. Of course, let's have a non-IP67 good phone rather than a bad IP67.
Yes. We provide 1 month warranty for such repairs. This is because this is an amount of interference with the device that may cause further problems in the future. For example, basically a motherboard repair service is not (or cannot) be undertaken by a warranty service provider. However, in many cases, these problems can be corrected, but as time goes on, the older a device is, and the more it is repaired, the more likely it is to break down again. Like just an old car.
The problem is we can say with 90% certainty that the bonding will come off. And have to come back to re-glue again. Not that you will not be able to save time, but you will have to pay a fee again, because in this case we can not guarantee it. Not to mention that the gap between the split screen or the back cover may get dirty, causing a short circuit, or blurring the display backlight, which can only be remedied by replacing the display. These are all additional costs and time spent in service. That is why we do not recommend that you take the device away prematurely. But of course, at our own risk.
These markings indicate the quality of the part. ORG quality means original. These parts are available from the manufacturer as boxed parts. They are usually offered at a price that often exceeds the market value of the device. It is impeccable in quality but not always economically recommended. OEM certification (Original Equipment Manufacturer) is a factory quality part. Its quality is equivalent to ORG, but can only be purchased in larger quantities from third parties. There may be a greater proportion of OEM parts than scraps, but because of their price, quality and our warranty, most of these quality parts are in stock and we recommend them for installation. AAA quality is a component that is slightly weaker than OEM quality, mainly assembled from remanufactured parts. Cheaper, but still recommended category. Below these are AA, A +, A, B quality, which we are unwilling to deal with because so many of them are scrap. It is not good for our customers or for us to come back to replace a part more than once.
As for everyone, it is an important factor for me to have a device with private contents like my iPhone, repaired before my eyes. This is the only way I can ensure that the private contents on my device are safe. The technicians at Smart Clinic were completely reliable and professional. They have already helped me twice with issues where the service provider would have chosen replacement. In the service shop, everything is very demanding, beautiful, and what is also important: clean. Beyond all my expectations, I got an excellent service, quickly, therefore I recommend it to anyone! Thank you, Smart Clinic!Balázs Sebestyén
Since I have virtually my entire life on my iPhone, it is indispensable both in my work and in my private life. So if I have a problem, it is important for me to get quick and professional help. At Smart Clinic, the guys were very professional and, even most important, everything happened in front of my eyes, so I knew my data were safe. A cheerful, helpful team, it is a good feeling to enter the store. They can solve everything and do all this in a kind way. I can only recommend it to everyone! Thank you!Bence Istenes
Nowadays it is no longer a question whether a person is keeping almost their entire life on his phone. This is no different for me. Should there occur any problem with my iPhone, following my first desperate reaction, I am reassured that I know where they will be able to remedy the trouble. This place is Smart Clinic, where they can find a solution to every issue, and technicians are helpful and kind. I love that I always have free lots to park in front of the service, which is a big advantage when one rushes from one place to another.Tibor Kasza
My friends call me a phone killer ... You can't list any damage that I have not caused to my poor devices: sooner or later everything that get into my hands will crack, lean, break, fall down or soak. Yet I love these devices! With passion and for real! That's why I have them so often in my hands. They are my family if my family can't be close. They're my work if I can finally leave the office. The news, my friends, the world. If they are not close to me, I feel strange, maybe I'm addicted, I don't know. Okay. If it is really needed, I can take 20 minutes 'off'. That is why I am grateful that here they are addressing our problems so quickly, simply and in a flawless way. Thank you!Nóra Ördög
As on the race track, time, speed and precision are very important to me in my everyday life. If there is a problem with any of these, you may even lose several months of work and preparation. The Smart Clinic team rebuilt my iPhone 5s with incredible speed and precision, I can say the guys won the qualifying race with the best results. So, with all my potential problems with smartphones, I will now look for them.Norbert Michelisz
In general, I have no strong attachment towards objects. This is especially true for a mobile phone. I don't pay enough attention to it. No matter how nice it is, I just can't get attached to it, and that you can take literally! Sliding, flying, falling, broken, cracking ... The trouble is that life stops without it. It's good to have Smart Clinic. :) Fast, flexible, kind, and last but not least reliable, precise work! I strongly recommend them to everyone!Ákos Dobrády